# A sample configuration for dhcpcd. # /var/ipfire/dhcpc/dhcpcd.conf # dhcpcd.conf # restart interface with # dhcpcd -k red0 # Only configure standard external ethernet allowinterfaces eth0 # disble lo denyinterfaces lo # Only obtain an IP address for IPv4 ipv4only # Allow users of this group to interact with dhcpcd via the control socket. #controlgroup wheel # Inform the DHCP server of our hostname for DDNS. hostname # Use the hardware address of the interface for the Client ID. #clientid # or # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361. # Some non-RFC compliant DHCP servers do not reply with this set. # In this case, comment out duid and enable clientid above. duid # Persist interface configuration when dhcpcd exits. persistent # vendorclassid is set to blank to avoid sending the default of # dhcpcd-::: #vendorclassid # A list of options to request from the DHCP server. option domain_name_servers, domain_name, domain_search option classless_static_routes # Respect the network MTU. This is applied to DHCP routes. option interface_mtu 1500 # Request a hostname from the network option host_name demogitjava.ddns.net # Most distributions have NTP support. option ntp_servers 2.rhel.pool.ntp.org # A ServerID is required by RFC2131. #require dhcp_server_identifier # Generate SLAAC address using the Hardware Address of the interface slaac hwaddr # OR generate Stable Private IPv6 Addresses based from the DUID #slaac private # A hook script is provided to lookup the hostname if not set by the DHCP # server, but it should not be run by default. #nohook lookup-hostname # disable ipv4ll (IPv4 local link/apipa) ip's #noipv4ll # Increase timeout to 60s timeout 60